Cynoacrylate

Are quick setting glues, though are generally low in sheer strength in vast moving stress areas. When our filler is applied to the glue in these areas a permanent weld has been created. Easy hand held containers. Adheres to metal, rubber, vinyl, glass, plastic, wood, leather, stone, cork, canvas, etc.

We have 3 velocities of the glue,

1. Filler Glue - grips in 5 seconds, appears watery. (Thin)
2. Glue - grips in 30 seconds, not watery. (Medium)
3. Gel - grips in 45-60 seconds, no drip. (Thick)

Methacrylates and Epoxies

Slow setting glues, but gives enormous strength like a weld. Removal is impossible.

Methacrylates - used in high heat, designed to go thru oil, grease, resin (cleaning the item is not necessary). Dries in 15 minutes. Used on various surfaces (metal, plastic, wood, concrete)

Epoxies - used in low heat metal surfaces. Clean the item first, this is very important. Dries clear in 5 minutes.

Underwater Epoxy

These glues are designed to cure underwater.

Polyurethane

Are generally used on wood and upholstery, due to the non damage to the material being glued. Hot Melts bonds the surfaces and acts like a sealer. Filler glue is watery and seeps down into hidden cracks and seals (This is the advantage of using the thin cynoacrylate glue on these surfaces). Else wise the gun system covers vast areas and is cost effective.

Fabric Glue

This glue is for hemming, patches and seam repair. Fabric to fabric and fabric to pearls and rhinestones. Washable and Dryable.

Removable Adhesive

To attach pictures and knickknacks temporarily without damage to surface when removed.

UV Rated

Designed for outside use and won't dissolve under the sun's UV rays.